CARPRO Reload 2.0 | Silica Spray Coating

A silica spray coating that’s quick to apply, safe on all gloss paint and hard exterior surfaces, and protects for up to 3 months.

Reload 2.0 is CARPRO’s silica spray coating. It was first made to keep CQUARTZ ceramic coatings performing at their best, and has since proven itself as a standalone sealant, so it works just as well on coated and uncoated cars. One bottle covers the paint, wheels, glass and trim.

The 2.0 formula combines silica and siloxane for a super hydrophobic finish. Water beads up and rolls off, taking dirt with it, so the car stays cleaner between washes and is quicker to wash when it’s due. It also stands up better to UV, road grime, chemicals and water spotting than the original Reload, with more gloss and slickness.

Application is quick. Spray it on, spread it with a microfibre cloth, wait 30 to 60 seconds and buff it off with a second cloth. It works on dry or slightly damp panels, and it won’t stain rubber or plastic trim, so there’s nothing to mask off.

On a coated car, Reload is the easiest way to keep the coating slick and beading between washes. If you’ve just applied CQUARTZ UK 3.0, Reload can go on as soon as you finish the final layer. See the FAQs for the timing.

For the best result, start with a clean car. Wash with CARPRO Reset, and prep the glass with CARPRO Clarify before you apply Reload. Spread it with an Aquatouch ACE cloth and buff it off with a CARPRO Edgeless Buffing Cloth.

If your paint or wrap is matte or satin, CARPRO MadMatte is better suited. It’s CARPRO’s silica spray sealant made specifically for those finishes.

Directions

How to use

1. Start with a clean car, working in the shade on a cool surface.
2. Shake well.
3. Spray Reload over a section about 50x50cm.
4. Spread it evenly with a microfibre cloth.
5. Wait 30 to 60 seconds.
6. Buff with a second clean microfibre cloth until the finish is clear.
7. Move to the next section, flipping your cloth between panels.

Tips

• A little goes a long way. Using too much causes streaks.
• If a section goes on uneven, wipe it with CARPRO Eraser and reapply.
• If you’re adding a second layer, let the first coat cure first.